4.0 kW 110mm ER25 2.5Nm CNC Router Mill Spindle 24,000rpm Water Cooled
KEY FEATURES
- ER25 Tool Holder
- Max. Speed - 24,000 rpm
- 4.0kW 110mm Diameter
- Constant Power Spindle
- Manual Tool Change
- Water Cooled or Oil Cooled.
- Mounting Flange & Conical Feature Optional
EMG Precision kicks up the power with this Industrial Grade 4.0kW Spindle with an 110mm Diameter form factor and Liquid Cooling. This particular spindle is for Medium demand machining.. This is a robust reliable performer.
Manual Tool Change
EMG Precision presents its range of Manual Tool Change, constant power electric machining centre spindle incorporating just a single tool-spindle interface the highest levels of accuracy and rigidity can be achieved. This provides a precise solution for systems that do not require tool change automation. Standard collets or shrink-fit collets are used as a cost effective medium between tool and spindle. Depending on the model, we use ER8,11,16,20,25,32 Tool Clamping systems for our Manual Tool Change Spindle.
Bearing Protection
Bearings are the life and soul of a precision spindle. We offer two bearing options; a high performance bearing from HRB or a Premium Series from our friends over at GMN a German specialist at the forefront of performance bearings. Please take a look at our Bearings page for more information. Although it is impossible for us to give you the expected life of the bearings as there are too many variables, you can rest assured that EMG Precision use only the best systems and components in order to minimise the rate of wear on your spindle, and prolong its life.
Runout Tolerances
OUR EMG-AT Series spindles achieve concentricity of less than 2microns at the cone. This means that an EMG Precision Spindle gives you excellent surface finish with minimal tool wear. Working to extremely small tolerances as we do means the axis offset is tightly controlled to ensure your spindle spins and wears evenly. To see the locations where the R1 & R2 Accuracy readings are taken please take a look at your MODEL Specific Manual here.
(You must be a registered Member to view Premium Content)
Optional Flange
The Flange option gives you more options for securing your spindle. With the right machine design clamping your spindle to your machine using a Flange will provide you with a much more rigid fixing.The the Flange option to view a photo of what this would look like on your spindle. Actual spindle model may vary. Conical design style remains the same.
Optional Conical Feature
The optional Conical features provide an even greater increase in rigidity for the flange. It is also an appealing visual feature that adds a distinct look to your machine when the spindle is fitted. Select the Conical Feature as an option to view a picture of what it would look like. Actual spindle model may vary. Conical design style remains the same. The Flange & Conical Photo is purely for illustrative purposes.
Parameter Name Specification EMG_Part_No. 109/CP-MTX_Z_P40_D110_24K Rated Power (kW) 4 Rated Torque (Nm) 2.5 220v Option Yes Rated Current(A) at 220V 15.2 Rated Frequency (Hz) at 220V 250 380v Option Yes Rated Current(A) at 380V 8.8 Rated Frequency (Hz) at 380V 250 Maximum Frequency (Hz) 400 Number of Poles 2 Maximum RPM 24000 Spindle Diameter (mm) 110 Type Of Tool Change Manual Tool Change (MTX) Cooling Form and Media Internal Cooling,Water or Oil Total Bearings 4 Bearing Distribution Front 2 Rear 2 Bearing Type (Front) Ceramic AC Bearings Bearing Type (Back) Ceramic Bearing Options HRB,GMN Lubrication Form LUBCON L252 grease Primary Material SS304 Rotor Aluminum Spindle Sensor N/A Wire Coil Jiangsu Datong Weight (KG) 16.5 Nose Interface ER25 Flange Option Optional Conical Feature Option Optional The Quality Inspection process involves the testing of a number of Key Parameters against rigorous standards and tolerances. The EMG Precision Quality Team make dimensional accuracy tests, vibration, temperature and Electrical Tests all designed to make sure your Spindle outperforms the highest of expectations.
When you purchase an EMG Precision Spindle you will recieve a a customised Test Inspection Report Specific to your Spindle. Please check out the Specific Test Criteria for any of our Spindles in the MODEL TECHNICAL MANUAL* section of our website.
Please be aware that we do not test the Torque achieved by each spindle as it is mathmatically implied by design and other testing parameters through calculation. Values quoted are still accurate.
*(you must sign-up to become a member before you can view our premium content).
The actual colour and appearance of the spindle may vary from the photos ,as achieving colour consistency across varying displays is not practicable.
The following Table lists the performance test specifications that your Spindle must pass in order to be shipped...
Type of Measurement Measurement Pass Specification Noise (Db) less than 75 V1 Vibration (mm/s) less than 0.8 V2 Vibration (mm/s) less than 0.8 Cool Oil Temp. (degreesC) 24 to 28 T1 Temp (degreesC) less than Oil Temp. + 20 degreesC T2 Temp (degreesC) less than Oil Temp. + 20 degreesC T3 Temp (degreesC) less than Oil Temp. + 20 degreesC Cold Winding Insulation Resistance?M?? greater than or equal to 500 Winding insulation voltage
resistance(V)This is a precision, bespoke, made to order item manufactured exactly to your chosen specifications. We do not hold stock of these items so your precision Spindle will be manufactured and quality tested bespoke to your order and specification
Digital Millennium Copyright Act Policy
Further Policies can be found at www.emgprecision.com
The user of this document acknowledges that some errors or omissions may be inherent in the content of the document, which cannot be prevented and users accepts and acknowledges that we, the company shall have no responsibility about such errors and omissions
PRICES ARE SUBJECT TO FREQUENT CHANGE DUE TO CHANGES IN THE EXCHANGE RATES AFFECTING RAW MATERIAL PRICES. WE BUY RAW MATERIALS, METALS AND SPECIALIST COMPONENTS FROM ALL OVER THE WORLD.
