VANTABLACK HSK63A SLN Side Lock Tool Holder | G2.5 - 30,000rpm | ≤1μm Runout
HSK63A SLN Side Lock CNC Tool Holder | G2.5-30,000rpm | ≤1μm Runout | EMG Precision VANTABLACK Edition | Ultra Precision | For Milling & Routing Spindles.
SLN16 = 16mm Shank
SLN20 = 20mm Shank
SLN25 = 25mm Shank
SLN32 =32mm Shank
ADVISORY
It is recommended that this HSK63A Tool Holder is used in conjunction with the 'HSK Tool Holder Tightening Fixture', in order to ensure that cutting tools are secured safely and correctly clamped. This can be found here...
This Tool Holder is Industrial Quality engineering and is balanced to precise specification by a German Haimer machine to G2.5 - 30,000rpm.
TECHNICAL Specification Details...
Surface Finish: Max. Ra0.25.
Material Hardness: HRC56-62.
Quality Controls: 100% Positive Release inspection.
Carburised Depth: >0.8mm.
Runout Tolerance: Less than or equal to 1 micron (0.001mm).
Taper: 1/10.
Standard: DIN69893.
Material: 20CrMnTi.
This is a highly precise, machined component, made by engineer’s, for engineer's. Good manufacturing practise should be followed in terms of cleanliness, ground surface treatments and safe storage. In order to maintain this components Ultra Precision, strict GMP should be adhered to at all times.
If you are looking for a cheap and cheerful CNC Tool Holder, this is not the option for you. If you want World-Class Engineering at an affordable price, EMG Precision holds itself and our products to the highest standards.
Whats Included? (as per specification chosen from available options)
x1 VANTABLACK Edition Ultra Precision CNC Tool Holder.
x1 Matching Ultra Precision Nut.
x1 Plastic Storage Case.
SAFETY NOTICE!
Do not exceed maximum revolution speeds. Ensure cutter is always safely and accurately secured into the tool holder before using. You MUST observe all safety usage guidance provided to you by the machinery manufacturer.
PRICE INCLUDES WORLDWIDE DELIVERY, DUTIES & TAXES.
The colour shown may vary slightly due in inaccuracies in colour representation between devices.
Surface Finish Max. Ra0.25 Material Hardness HRC56-62 Quality Controls 100% Positive Release inspection Carburised Depth >0.8mm Runout Tolerance Less than or equal to 1 micron (0.001mm) Taper 1/10 Standard DIN69893 Material 20CrMnTi Brand OLI Digital Millennium Copyright Act Policy
Further Policies can be found at www.emgprecision.com
The user of this document acknowledges that some errors or omissions may be inherent in the content of the document, which cannot be prevented and users accepts and acknowledges that we, the company shall have no responsibility about such errors and omissions
PRICES ARE SUBJECT TO FREQUENT CHANGE DUE TO CHANGES IN THE EXCHANGE RATES AFFECTING RAW MATERIAL PRICES. WE BUY RAW MATERIALS, METALS AND SPECIALIST COMPONENTS FROM ALL OVER THE WORLD.
